The Glass & Polishing Cloth is commonly the dry finishing cloth in E-Cloth’s two-step process. Wetting every cloth in the kit at the start can erase that distinction.
The UK manufacturer guide recommends cleaning first with another suitable cloth, then using the Glass & Polishing Cloth dry on the wet surface. It also describes using a water spray directly on lightly soiled glass before wiping with the dry polishing cloth.
Separate cleaning from finishing
For a heavily marked surface, use the appropriate first cleaning step rather than expecting a finishing cloth to do every job. Keep a dry section available for the final pass. The guide recommends folding the cloth so that fresh sections can be exposed as it becomes wet.
| Observation | Practical check |
|---|---|
| The cloth is saturated | Refold to a drier section or use another clean cloth |
| Visible dirt remains | Revisit the initial cleaning step |
| Only light fingerprints remain | Use the documented spray-and-dry-cloth method if suitable |
Follow the surface manufacturer’s instructions for specialist coatings. A general glass-cleaning description should not be treated as universal approval for every display, lens or coated surface.
Our buying preference is a kit whose cloth roles are easy to distinguish, especially when several people use it. Documentation read 25 October 2026. No streak-removal, abrasion or hygiene test; this is an explanation of the maker’s workflow. More buying guides.
Leave a Reply